Moxa Technologies Switch Uport 1400 1600 User Manual

2. Click Next to install the driver in the indicated folder.  
2. Package Checklist  
Before installing the UPort 1400/1600, verify that the package contains  
the following items:  
1400/1600  
USB-to-Serial Hub  
Quick Installation Guide  
UPort 1400 or 1600 USB-to-Serial Hub  
1 USB Cable  
Document and Software CD-ROM  
UPort 1400/1600 Quick Installation Guide  
Power Adaptor (UPort 1400/1600-8) or Power Cord (UPort 1600-16)  
First Edition, June 2006  
Notify your sales representative if any of the above items are missing or  
damaged.  
1. Overview  
UPort is the brand name of MOXA’s new USB-to-serial product line,  
which provides a wide range of products and solutions to extend  
Windows COM ports via the PC’s USB port. Important features of UPort  
products include support for hi-speed (480 Mbps) USB 2.0, Moxa CPU,  
Moxa UART, the ability to assign COM port numbers, magnet  
accessories, and mini female DB9 to terminal block. These features make  
the UPort products easy to use and maintain. The UPort 1400 series  
includes UPort 1410 with 4 RS-232 ports, and UPort 1450 with 4  
RS-232/422/485 ports. The UPort 1600 series includes UPort  
1610-8/1610-16 with 8 or 16 RS-232 ports, and UPort 1650-8/1650-16  
with 8 or 16 RS-232/422/485 ports.  
3. Installing the UPort 1400/1600 Driver  
WARNING  
If your host PC uses an nVIDIA nForce 4 processor and you find that  
your host PC is not receiving the correct data, you should enter the PC’s  
BIOS configuration utility and disable USB 2.0. This will cause your  
host PC to use the USB 1.1 specification, which should prevent the data  
transmission problem from recurring.  
3. Click Install to proceed with the installation.  
1. Run the Setup program located on the UPort 1400/1600 Document and  
Software CD-ROM. Click Next to Start installing the driver.  
Before connecting the UPort 1400/1600 USB-to-serial hubs to your  
computer’s USB port, we recommend installing the UPort 1400/1600  
driver first. To do this, follow the installation procedure described in  
Section 3.  
The installation procedure described in Section 3 was done on a PC  
running Windows 2000 (x86). Windows XP and 2003 (32-bit and 64-bit)  
driver installations are the same. UPort 1400/1600 can be connected to  
any upstream type A USB port that is on the PC host or on an upstream  
hub. UPort 1400/1600 is hot pluggable, and therefore there is no need to  
power down your computer prior to installation.  
After installing the driver, connect the UPort 1400/1600 to an upstream  
host or hub. The Found New Hardware wizard will locate the  
appropriate drivers automatically. Once the drivers are found, various  
windows will pop up as UPort 1400/1600’s serial port is being installed.  
When the Found New Hardware wizard finishes installing UPort  
1400/1600, use the operating system’s Device Manager to check and/or  
modify the port settings. The new COM port will be listed under Ports  
(COM & LPT).  
P/N:1802014000000  
— 1 —  
— 2 —  
— 3 —  
 

Multiquip Marine Sanitation System C30HDZ User Manual
Multiquip Riding Toy J B User Manual
NETGEAR Network Hardware XAVB5602 100NAS User Manual
Network Instruments Network Card Network Analysis User Manual
Nikon Photo Scanner IV ED User Manual
Nortel Networks Intercom System NN40010 302 User Manual
Omega Vehicle Security Switch OMG COMM2 EX User Manual
Onkyo Stereo System TX SR573 User Manual
Panasonic Air Conditioner CS E18GKR User Manual
Panasonic Electric Shaver ES364 User Manual